19
1. DOCUMENT HOLDER
2. POWER ZONE™ CONTROLLER: Refer to “Power Zone™ Controller” on page 20.
3. AUXILIARY LIGHT SWITCHES (2) (Optional): These switches operate the control panel and interior lights.
4. 120V GFCI RECEPTACLES (2): Receptacles for additional equipment that may require Ground Fault Circuit
Interrupt (GFCI) protection.
5. 50A CIRCUIT BREAKERS (3): Circuit breakers for the 120/240V twist-lock receptacles.
6. REMOTE START TERMINAL BLOCK: Used to connect the generator to a dry-contact closure switch for remote
starting of the unit.
7. CAM LOCK CONNECTORS (10) (Optional): Series 16 taper nose 400A/600V cam locks are connected here.
(Green) Cam lock ground connection for attaching the generator to a good earthen ground. For additonal
information, refer to “Generator Cam Lock Connection(s) Option” on page 28.
8. CONNECTION FOR BATTERY CHARGER (Optional): Allows for 120VAC input to power onboard battery
charger.
9. 120/240V TWIST-LOCK RECEPTACLES (3): These receptacles are used for connecting additional loads or
equipment to the generator in the 240 and 208 voltage selections only.
10. CONNECTION FOR ENGINE BLOCK HEATER (Optional): Allows for 120VAC input to power the engine block
heater.
11. DOOR SAFETY SWITCH: The connection lug door and cam lock door are equipped with a safety interlock
switch that will trip the main circuit breaker and disable the voltage regulator if the doors are opened while the
unit is operating.
12. OUTPUT GROUND CONNECTION: Ground lug for attaching the generator to a good earthen ground.
13. CONNECTION TERMINAL LUGS (4): External loads can be wired to these lugs.
14. 20A CIRCUIT BREAKERS (2): Circuit breakers for the 120V GFCI receptacles.
15. MAIN CIRCUIT BREAKER FOR CONNECTION LUGS: This breaker will disconnect power to the connection
lugs (items 12-13). It WILL NOT disconnect power to the receptacles when the engine is running. The main
circuit breaker will trip in order to protect the generator from damage if a load is too great.
16. DIESEL EXHAUST FILTER CLEANING SWITCH: This switch toggles between enabling or disabling the auto
exhaust cleaning feature and entering manual regeneration. For additional information, refer to “Exhaust Filter
Cleaning Operations” on page 38.
Comentarios a estos manuales