Marathon FTvirtual Server Manual de usuario descargar pdf (Pagina 7)

Release 6.1.1 System Requirements

A Endurance Configuration is comprised of two Intel-based servers (called CoServers),

identically configured, and qualified by Marathon. Each server must contain the hardware

described in Table 1 and support the software described in Table 2.

Table 1 Release 6.1.1 Hardware Requirements

Hardware Requirement Notes

Either 2 Pentium 4 processors or

1 Pentium 4 processor with

platform support for hyper-

threading

• All processors must be the same model and have compatible

stepping.

• A minimum processor speed of 1.5 GHz is recommended.

512 MB RAM • A maximum of 4 GB of memory is allowed in each CoServer.

• A minimum of 768 MB of RAM is recommended

1 hard drive • Configurations consisting of a minimum of 1 or 2 hard drives per

CoServer can be used. When using 1 hard drive per CoServer,

you must use an Endurance Virtual Disk for the FTvirtual Server

boot disk. When using two physical drives, one drive may be

dedicated as the CoServer boot disk and the second as the

FTvirtual Server boot disk.

• NTFS partitions are required for all boot disks in the Endurance

Configuration.

2 network ports • 2 1-Gb ports

• 2 10/00 or 10/100/1000 ports

SCSI Host Bus Adapter, IDE

Controller, Serial ATA, or RAID

Controller

1 CD-ROM Can be either SCSI or IDE

2 crossover network cables For non-SplitSite configurations, Category 6 copper or fiber

compatible with your 1 gigabit network interface cards (CoServer

Links)

2 network patch cables Standard Ethernet connections to your production LAN

A remote server running

Endurance Quorum Server

For SplitSite configurations only.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Sin comentarios

Marathon FTvirtual Server Manual de usuario Pagina 7